Эту статью необходимо переписать в соответствии с принятыми стандартами качества.
Пожалуйста, помогите улучшить эту статью. Более подробную информацию можно найти на странице обсуждения. |
Пожалуйста, помогите улучшить эту статью. Более подробную информацию можно найти на странице обсуждения.
Причина: "Страница содержит язык, не относящийся к вики (с обращением к читателю), и предвзятое мнение в отношении разгона"
Эта статья описывает основы производственных линий, как читать интерфейс зданий (например, значения ввода и выхода), и как вычислять соотношение зданий.
Чтение интерфейса здания[ | ]
Простая производственная линия состоит из: буровая установка -> плавильня -> конструктор -> Складской контейнер. В данном примере, все здания имеют соотношение 1:1, т.к. показатели производства и потребления полностью совпадают (выделено красным). Под каждым зданием находится его интерфейс, доступ к которому можно получить, стоя рядом со зданием и взаимодействуя с ним на E.
Буровая установка[ | ]
Буровая установка добывает руду со скоростью, зависящей от качества месторождений и уровня самой буровой установки. Качества месторождений, будь то бедное, обычное или богатое зависит от его расположения на карте. Более высокие уровни буровых установок могут быть разблокированы по мере прогресса целей и повысят скорость добычи. В данном примере, буровая установка ур. 1 добывает 30 железной руды/мин из месторождения под ней.
Плавильня[ | ]
Плавильни переплавляют руды в слитки. В том же примере, 30 железной руды потребляется каждую минуту в размере 30 ед. на производство 30 жлезных слитков.
Конструктор[ | ]
Конструктор производит полезные предметы из слитков. В том же примере, каждые 3 жлезных слитка потребляются для производства 2 железных пластин; т.к. за 3 слитка производится 2 пластины, то они будут выходят такими же группами по 2 ед. по очереди. Эти цифры можно игнорировать в схемах автоматизации, поскольку мы должны следить за расходом деталей и скоростью производства. Более маленький номер под жирным текстом означает потребление - 30 железных слитков потребляются в минуту, а 20 железных пластин производятся в минуту.
Глядя на скорость изготовления (жирный текст), мы можем сделать вывод, что для изготовления каждой железной пластины требуется 1,5 железных слитков.
3 / 2 = 1.5
Конвейерная лента[ | ]
Conveyor Belts automatically transport items from one building to the next so you don't have to manually carry the items all the time. They have a rated item flow rate, so if a higher item flow rate is required, consider using higher marks of Conveyor Belts, or by constructing multiple parallel belts. Else, the entire production line may get slowed down due to insufficient item flow.
Складской контйнер[ | ]
The Storage Container in the above example is optional. Its purpose to store and buffer produced items so that the machines before it can run smoothly. Most of the production buildings can only store up to one stack of items at its output slot, and once it is full, the machine stops.
Разгон[ | ]
The speed of all the above machines can be altered with overclocking, which will be discussed in the section below.
Разветвление и соединение[ | ]
Production chains rarely work in a 1:1 building ratio; the example shown in the previous section is just a special case. If there is a mismatch in the buildings' ratio, the entire chain is slowed down proportionally to the slowest element in the chain. This reduces the efficiency and should be avoided.
To achieve 100% efficiency (as indicated by the '100%' at the lower right of each machine's UI), make sure the production rate from one machine matches the consumption rate of the next machine. And if they don't match, just build more machines until the numbers match.
The term 'Efficiency' is used to describe the uptime of a machine, usually denoted in percentage (%).
Буровая установка[ | ]
A Miner Mk.1 on a normal Copper node extracts Copper Ores at 60/min.
Плавильня[ | ]
A Smelter consumes Copper Ores at only 30/min. To achieve 60/min consumption, build two of them. Use a Splitter to split the Conveyor Belt into two.
60 / 30 = 2
If only one Smelter is built, the Copper Ores produced by the Miner will not be consumed fast enough, and they will backlog into the Miner and causing it to run at only 50% of the time. This is equivalent to 50% efficiency.
Each Smelter produces Copper Ingots at 30/min.
Конструктор (проволока)[ | ]
Each Constructor consumes Copper Ingots at only 15/min. Similarly, split each of the Copper Ingot belt into two, this means four Constructors are required.
30 / 15 = 2
(each Smelter output belt split into two)
2 x 2 = 4
(two Smelters support four Constructors)
Each Constructor produces Wires at 30/min.
Конструктор (кабель)[ | ]
Each Constructor consumes Wires at 60/min. That means the Wires from a single Constructor will not be enough - we need two. To combine the output of two Constructors, use a Merger.
30 * 2 = 60
If only one Constructor crafting Wires is connected to the Constructor crafting Cable, the latter will only run 50% of the time due to insufficient input rate. This is equivalent to 50% efficiency.
Each Constructor produces Cables at 30/min.
Конвейерная лента[ | ]
Conveyor Belt Mk.1 can only transport 60 items/min. In the above example, the belt carrying Copper Ores after the Miner, and the belts transporting Wires after the Mergers are operating at their maximum capacity.
Складской контейнер[ | ]
A Storage Container is used to store each type of item. As a good practice, avoid mixing items in Storage Containers. A Merger is used to merge two Wire belts into one before the Container so that you don't have to build two Containers for Wires.
Разгон и скорость конвейерной ленты[ | ]
As the number of resource nodes in the world is finite, there is a hard limit on the total extraction rate. To maximize the potential of a resource node, Miners should be Overclocked. The overclocking ability can be researched in MAM.
Буровая установка[ | ]
The Miner Mk.1 on a normal Iron node in the above example is overclocked to 250% (x 2.5 speed), hence it extracts Ores at 150/min.
60 x 2.5 = 150
Плавильня[ | ]
Each Smelter consumes 30 Iron Ores / min to yield 30 Iron Ingots / min. Five (5) Smelters should be built to fully utilize the extracted Ores.
150 / 30 = 5
Конвейерная лента[ | ]
Conveyor Belt Mk.1 is not fast enough (60 items/min) to pull out all the ores extracted by the overclocked Miner (150 items/min), thus higher marks of the belt are required. Else, the Miner will not run at its overclocked potential.
Conveyor Belt Mk.3 can handle the 150/min item flow rate and should be built right after the Miner. Where the item flow rates are between 120/min and 60/min, Conveyor Belt Mk.2 should be used. The remaining belts can be built as Mk.1. Alternatively, all belts can be built with Conveyor Belt Mk.3, if there is sufficient material to do so.
Разветвитель[ | ]
Splitters are built in a manifold style. Each split takes away the machine consumption rate from the main belt or half of the incoming item speed, whichever is lesser (see the yellow numbers beside the belt). The last Splitter at the far left is optional; it is built for future expansions, when higher marks of Miner are unlocked. Plus they look neater.
Дроби и десятичные дроби[ | ]
There are many occasions where the building ratio doesn't end up as integers. The Limestone -> Concrete setup, for instance, is the first production chain that contains fractional ratio:
60 / 45 = 1.333 or 1+1/3
The Limestones produced by a normal Miner can support 1.333... Constructors.
Obviously, we can't build one-third of a machine, so two Constructors should be built to fully consume the Limestone produced by the Miner. But then two Constructors require 90 Limestones/min.
Let's see a few approaches to solve this issue:
Угон последнего производственного здания[ | ]
Underclock the 2nd Constructor to 34% is the closest form we can achieve the 1.333... ratio. Do not underclock it to 33%, as we will lose the 0.33% processing speed. Take note Clock Speed can only be set to integers of percentage.
Угон всех производственных зданий[ | ]
Underclock both Constructors to 67% has the benefit of improved power saving compared to the previous method. You can examine the power consumption of each underclocked building and add them up.
1.3333 / 2 = 0.6666 = 67%
Пропуск угона[ | ]
Not underclock any of the Constructor works just fine. In general, any decimal in building ratio can be simply rounded up to the next integer, for example:
60 / 45 = 1.333 -> 2
400 / 30 = 13.33 -> 14
100 / 110 = 0.909 -> 1
In the above example, if both Constructors are not underclocked, they will just run and stop intermittently, but still effectively converts 60 Limestones / min to 20 Concretes / min. The difference is, underclock reduces power consumption. This method can be used before the Overclocking ability is unlocked.
Разгон буровой становки[ | ]
Overclock the Miner to 150% or 225% will make the ratio becomes integer.
45 x 2 = 90
90 / 60 = 1.5
(150% overclock, one Miner to two Constructors)
45 x 3 = 135
135 / 60 = 2.25
(225% overclock, one Miner to three Constructors)
Разгон конструктора[ | ]
Only build one (1) Constructor and overclock it to 134% allows all the Limestone to be consumed effectively. Take note as Power Shard is a limited resource, this method is not recommended.
Комплексная производственная линия[ | ]
Reinforced Iron Plate, for example, consists of more than one ingredient. In the above image, the buildings are set up based on a 1:1 ratio. This setup still works, but with lower efficiency due to incorrect building ratio. Let's examine each of the components:
Буровая установка[ | ]
Miner Mk.1 on a pure Iron node extracts 120 Iron Ores / min. Pure nodes are quite common in Northern Forest and they yield double rate. The Conveyor Belt Mk.1 after it is not fast enough and should be replaced with Conveyor Belt Mk.2.
Плавильня[ | ]
A Smelter consumes 30 Iron Ores / min and produces 30 Iron Ingots / min. So, this Miner can support four Smelters.
120 / 30 = 4
Расветвление - вопрос[ | ]
Here is the problem. Iron Ingots are to be split among Iron Rods and Iron Plates, but we don't know the ratio between them. To solve this, we can use the top-down method: start from the end product, then work backward to its raw ingredients.
Усиленная железная пластина[ | ]
The Assembler crafting Reinforced Iron Plates, or RIP, needs Iron Plates at 30/min and Screws at 60/min. If either of the ingredients faces a shortage, the entire chain will be slowed down.
Железная пластина[ | ]
In the previous section, we have learned that each Iron Plate requires 1.5 Iron Ingots to craft. To produce 30 Iron Plates/min, 45 Iron Ingots/min is required.
30 * 1.5 = 45
Винты[ | ]
Each Iron Rod can be crafted into four Screws. That means 60 Screws/min requires 15 Iron Rods/min.
60 / 4 = 15
Железный прут[ | ]
Each Iron Rod is crafted from one (1) Iron Ingot; the ratio is 1:1. That means 15 Iron Ingots/min is required to craft 15 Iron Rods/min.
Расветвление - заключение[ | ]
For each minute, 45 Iron Ingots should be allocated to Iron Plates and 15 Iron Ingots should be allocated to Iron Rods. The total consumption would be 60 Iron Ingots/min.
45 + 15 = 60
By dividing those numbers by a common divisor, the ratio can be simplified to 3:1. That means, three quarter of the Iron Ingot goes to the Iron Plate and a quarter goes to Iron Rod.
45 : 15 == 1 : 3
(divide both by 15)
The Miner above has the capability to produce 120 Iron Ores/min, which can be crafted into 120 Iron Ingots/min. This means up to two Assemblers crafting Reinforced Iron Plates can be supported.
120 / 60 = 2
With these numbers, we can work from the bottom-up, reversing the calculation process, then multiply the setup by 2. From here and below, we omit the word 'per minute' for simplicity.
Конструктор (железная пластина)[ | ]
45 x 2 = 90
90 Iron Ingots are used to craft 60 Iron Plates. Three (3) Constructors are required.
90 / 30 = 3
Конструктор (железный прут)[ | ]
15 x 2 = 30
30 Iron Ingots are used to craft 30 Iron Rods. Two (2) Constructors are required.
30 / 15 = 2
Конструктор (винты)[ | ]
60 x 2 = 120
30 Iron Rods are used to craft 120 Screws. Three (3) Constructors are required.
120 / 40 = 3
Ассемблер (усиленная железная пластина)[ | ]
Two Assemblers are required to craft the Reinforced Iron Plate.
Конвейерная лента[ | ]
We will use Splitters and Mergers to distribute the items. Identify which belts will carry more than 60/min, and construct them with Conveyor Belt Mk.2 or above.
Онлайн инструменты[ | ]
Online tools can be used to great extent to lay out the production lines of any item using desired alternate recipes.
|