 |
Этот текст еще не переведен на русский язык! Этот шаблон должен быть удален после завершения перевода. |
Этот шаблон должен быть удален после завершения перевода.
The Packager is a building used to package and unpackage fluids in and out of 
Empty Canisters or 
Empty Fluid Tanks. Both Canisters and Fluid Tanks are returned when fluid is unpackaged from them, allowing them to be reused. Packaged liquids can be transported with Conveyor Belts and is somewhat more efficient when transporting them with Conveyor Lifts due to the power usage of Pipeline Pumps.
Рецепты[ | ]
Overclocking[ | ]
Упаковщик может быть ускорен(а) при помощи энергомодулей. Разгон увеличивает скорость входа/выхода Упаковщик, при этом увеличивается потребление зданием энергии прямо пропорционально производящейся детали или ресурсу.
| Тактовая частота | 25% | 50% | 75% | 100% | 150% | 200% | 250% |
|---|---|---|---|---|---|---|---|
| Потребление (МВт) | 1.09 | 3.3 | 6.31 | 10 | 19.13 | 30.31 | 43.32 |
Head lift[ | ]
The Packager has a recommended head lift of 10 meters, measured from the center of its pipe outlet.
Trivia[ | ]
- "PAC-IT MK1" is written on the machine, suggesting that higher marks would be available, though it has been denied by developers.[1]
- Before the introduction of the Packager, Refineries were given the job of packaging and unpackaging liquids. Refineries that were constructed after the update lost this ability.
- To calculate the energy spent to package / unpackage a certain fluid:
Energy = 600 MJ / (rate of un/packaging in X/min). The multiplier for the item recipe can be ignored as only the rate is concerned.
Галерея[ | ]
A screenshot from the teaser, with the robotic arm causing a spillage.
История[ | ]
- Patch 0.3.6: Introduced
References[ | ]
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
