Hyper Tube Supports

Hyper Tube Support
Supports for Hyper Tubes to allow for longer distances.
Unlocked at	Tier 4 - Hyper Tubes
Category	Transportation
Subcategory	Hyper Tubes
Dimensions (Area 2 m2)
Width	2 m
Length	1 m
Height	(1/3/5/7)+2 m
Required items
2 2

Stackable Hyper Tube Support
Supports for Hyper Tubes. Can be stacked on other stackable supports.
Unlocked at	Tier 4 - Hyper Tubes
Category	Transportation
Subcategory	Hyper Tubes
Dimensions (Area 2 m2)
Width	2 m
Length	1 m
Height	Stackable: (2n+2) m
Required items
4 2 2

Hyper Tube Wall Support
Can be attached to walls. Supports for Hyper Tubes to allow for longer distances.
Unlocked at	AWESOME Shop - Hyper Tube Wall Attachments
Category	Transportation
Subcategory	Hyper Tubes
Dimensions (Area 2 m2)
Width	2 m
Length	1 m
Height	2 m
Required items
2 2

Hyper Tube Wall Hole
Can be attached to walls to allow Hyper Tubes to pass through them.
Unlocked at	AWESOME Shop - Hyper Tube Wall Attachments
Category	Transportation
Subcategory	Hyper Tubes
Dimensions (Area 2 m2)
Width	2 m
Length	1 m
Height	2 m
Required items
2 2

Hyper Tube Supports are logistic structures used to support Hyper Tubes.

All kinds of Supports allow a Hyper Tube to be attached to it from both sides, as well as Hyper Tube Entrances. Hyper Tubes keep on working even if the Supports supporting them are dismantled.

Types

Type	Unlocked at	Cost	Properties
Hyper Tube Support	Tier 4 - Hyper Tubes	2×  Iron Plate 2×  Concrete	Default Support used while constructing Hyper Tubes. Adjustable height from 1 to 7 meters in 2-meter increments. Can be also tilted.
Stackable Hyper Tube Support	Tier 4 - Hyper Tubes	4×  Iron Plate 2×  Iron Rod 2×  Concrete	Stackable Support that has a ladder on both sides. Can be stacked indefinitely. Ground Support is 4 m tall, all stacked ones 2 m. Compatible with other types of stackable logistic supports.
Hyper Tube Wall Support	AWESOME Shop - Hyper Tube Wall Attachments	2×  Iron Plate 2×  Concrete	Attaches to the sides of Walls and Foundations only.
Hyper Tube Wall Hole	AWESOME Shop - Hyper Tube Wall Attachments	2×  Iron Plate 2×  Concrete	Attaches to Walls only. Allows Hyper Tubes to pass through the Wall.

Construction

Standard Hyper Tube Supports are built by clicking () once to set the location, then scrolling to rotate (or Ctrl angle) and looking up or down to change the height (if desired), confirming the placement by clicking again. If the "Execute Build Step on Release" option is enabled, has to be held down to adjust the rotation and height while placing.

Stackable Hyper Tube Supports are built simply by placing them on the ground, on each other or other kinds of stackable supports. It's not possible to make them the default type of Supports used when building Hyper Tubes.

Hyper Tube Wall Supports can only be built on Walls and on the sides and ceilings of Foundations, as mentioned above. Hyper Tube Wall Holes can be built on Walls and serve the same purpose as Conveyor Walls, but can be placed anywhere on the Wall, making them much more modular.

Gallery

• 

  All kinds of Stackable Supports

• 

  Different types of Stackable Supports on each other

History

• Patch 0.3.6: Wall attachments can now be placed under and on the side of Foundations
• Patch 0.3.3.2:
  • New icon for Stackable Hyper Tube Support
  • Stackable Poles can no longer be placed inside of each other
• Patch 0.3.3.1: Added Stackable Hyper Tube Support
• Patch 0.3.2.0:
  • Different stackable poles can now be stacked with each other
  • Added Hyper Tube Wall Support and Wall Attachment
• Patch 0.3: Normal and stackable supports introduced

See also

• Conveyor Poles
• Pipeline Supports